Martindale abrasion tester purchase notes

Martindale abrasion tester is mainly used to test the abrasion resistance or pilling performance of fabrics and leather and other materials, at present, Martindale abrasion tester has a wide variety of brands, each manufacturer has its own characteristics, the price is uneven, many enterprises in the procurement of Martindale abrasion tester will be torn how to choose, the high price does not mean that the quality is necessarily good, the low price does not mean that the quality is poor. So business procurement how to practice a pair of fire eyes it, wear tester manufacturer from the following characteristics to you analysis.

Martindale abrasion tester applications

Martindale abrasion resistance tester can test the abrasion resistance and pilling performance of various plants. Under a certain pressure, the specimen and the specified abrasive are subjected to continuous commutation friction, and the standard parameters are compared to evaluate the degree of wear and puckering. Touch screen control with fully functional programmer with pre-programmable batch and total counts, individually set counts for each test head; 4 speeds including standard speed can be selected.

Martindale abrasion tester complies with the following standards

GB/T 21196.1-2007 Textiles Determination of abrasion resistance of fabrics by Martindale method Part 1
GB/T 21196.2-2007 Determination of abrasion resistance of textiles by Martindale method Part 2
GB/T 21196.3-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 3
GB/T 21196.4-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 4
GB/T 4802.2-1997 Textiles Fabric pilling test Martindale method
GB 8690-88 Woolen fabrics abrasion resistance test method Martindale method
ISO 12945-2:2002 Textiles Determination of surface pilling properties of fabrics Part 2 Martindale method
GB/T 13775-92 Abrasion resistance test for cotton, linen and silk woven fabrics Martindale method
ASTM D4966-1988 Fabric abrasion resistance test Martindale abrasion tester
ASTM D4970-2002 Test method for pilling resistance of fabrics Martindale tester

Martindale Abrasion Resistance Tester Technical parameters

1、Number of bits: 4 bits
2、Counting range：0～999999 times
3、Maximum dynamic range: horizontal: 60±0.5mm vertical: 24±0.5mm
4、Quality of pressurized object
a. Gripper: 198±2g
b. Clothes specimen weight hammer: 395±2g
c. Furniture ornament sample weight hammer: 595±2g
5、The effective friction diameter of the grinding block.
A type 200g (1.96N) friction head (9KPa) ￠28.8 -0.084mm
6, clamping device and grinding table relative movement speed: 50 ± 2r / min, 47 ± 2r / min (1-120 r / min adjustable)
7、Mass of loading sample press hammer: 2385g±10
8、Appearance size: 885×600×410mm
9、Electricity source: Ac220V 50Hz 500W
10、Weight：100kg

The above is the basic parameters of Martindale wear tester configuration requirements, here the wear tester manufacturer to highlight the following points.

1, Martindale wear tester whether to meet the company's testing standards, this is very important otherwise is to purchase scrap iron back.
2, Martindale wear tester has more than one friction head, so companies purchase a few friction head is more appropriate, this also needs to be considered, after all, more than one friction head relative cost will certainly rise, this should be based on the actual needs of the company to purchase;.
3, performance stability, this is very important for the enterprise, conventional testing is generally carried out over a longer period of time, if the test company uses a larger amount, if there is no stability guarantee, the consequences can be imagined;.
4, after-sales completeness, timeliness of service and other issues.

If you encounter how to doubt in the process of procurement, feel free to contact us, we provide you with professional technical and product knowledge.

Prev: Martindale Abrasion Tester for common Consumables