Common faults and maintenance precautions of automotive interiors abrasion tester

The automotive interiors abrasion tester adopts the way of rotating wear, which is used to test the appearance changes of samples after friction or wear test, and is mostly used for automobile interior materials test. During the test, friction is applied to the rotating sample in the tangential direction through friction parts, and the wear resistance of the sample is measured. So what are the common faults? What are the maintenance items? The following questions are answered by Qinsun Instruments Co., LTD for everyone.

Common faults of automotive interiors abrasion tester:

1. If the power is turned on and it is not displayed, it means that the power is not turned on or the power indicator is damaged. If the power indicator is damaged, replace the indicator. If there is no power output at the power output terminal, please check the power cord or power socket.
2. If the power is turned on and the power indicator indicates that the machine does not work, please check whether the relay is disconnected or broken. If the relay is disconnected or broken, please connect it in time. If the relay is not disconnected or broken, it means that the relay has been damaged, so it should be replaced in time.
3. After the test reaches the number of times set by the counter, the motor still does not stop working, indicating that (1) the counter is damaged; (2) The counter is not cleared after setting the number of times.
4. If the power indicator is on and the counter is not displayed, it means that the counter is damaged, so the counter needs to be replaced.

Maintenance items of automotive interiors abrasion tester:

1. The automotive interiors abrasion tester must be placed on a stable ground before use;
2. It is not allowed to handle the machine during use;
3. Choose the corresponding power supply voltage, do not be too high to avoid burning out the device;
4. When the instrument is abnormal, please contact our company for timely treatment;
5. The automotive interiors abrasion tester must have a good ventilation environment when working;
6. For each component of key machinery, please add lubricating oil to the mechanical part in time due to the heavy operating load;
7. After each test, clean the machine and keep it clean.

Prev: How to operate the martindale abrasion tester?